Good Earth Lighting, Inc. G9100-TD Touch Pad Dimmer

Cheap Good Earth Lighting, Inc. G9100-TD Touch Pad Dimmer Review

This dimmer originally purchased in my local Lowes. I was impressed by how well it is done, add the fact that the end was the same type used on extension cords (3 receptacle second one on the other side). I used this dimmer lighting installed under the cupboard a few years ago.

I recently remodeled the kitchen and the other dull need for a separate group under counter lights. I tried to dull cheaper at the local Lowes (they will no longer carry it) it wasCompletely usable light levels is not working properly the first level just buzzed with the second-level light was barely enough to see the bulb glow when directly looking at him three was full. Once it was turned off it still buzzed (still using electricity).

Luckily I found them right here on Amazon, as I did before. Dim it works flawlessly at all levels, and it does not hum when off (not using any electricity.) I did not learn last time asAs stated in other reviews provided bilateral recording is not enough to hold the power button for long. I was a little clear silicone adhesive caulk that I attach to my next assumption.

I just bought extra to go dim in the bedroom since my wife's lamp is high on the chest and required almost getting out of bed to turn off. Now all she needs to do is to press the pillow while lying down to turn off the light, and now we get an added bonus of not a lamp on full blastWhile she calls and I'm trying to sleep!

Good Earth Lighting, Inc. G9100-TD Touch Pad Dimmer Feature

• 2-inch diameter touch pad dimmer
• For use with halogen or incandescent plug-in fixtures
• Easy to install; high, medium, low, and off settings
• Metallic touch pad, black
• 1-year limited warranty; for 12-/120-volt halogen or incandescent bulbs, 200-watt maximum

Good Earth Lighting, Inc. G9100-TD Touch Pad Dimmer Overview

This handy, low-profile dimmer switch may be used with Good Earth Lighting's halogen or incandescent lighting systems. The G9100 gives you four lighting levels with the touch of a finger.

While there is some assembly required--you'll need wire strippers and cutters and perhaps a stepladder--the process is straightforward. The included instructions make the process clear (despite many glaring typos): just trim the plug cord to the desired length, attach it to the plug, then mount the dimmer with the included adhesive pad and connect to your lighting source. Note that you can attach the dimmer wire to a cabinet hinge and use that as your dimmer instead of the touch pad.--Josh Dettweiler

What's in the Box
Dimmer switch (touch pad and spade plug), transformer (outlet and power cords, spade jack), and hardware kit (plug assembly, adhesive pad), owner's manual

*** Product Information and Prices Stored: Jun 04, 2010 18:00:17