Vizia RF Z-Wave 15 Amp Switch

Cheap Vizia RF Z-Wave 15 Amp Switch Review

I have an external light control switch with a compact fluorescent bulb installed (and thus the need to a). It works reliably for about 6 months, with a daily on / off cycle. It is controlled by the Z-Wave timer, so the local switch receives little use.

Paddle switch is a momentary button (lower half) that cycles between on and off, and the traditional swing.

I chose the version that is supposedly Leviton Z-Wave will be sentMessages change the state when the local switch is pressed, unlike some competing models that require polling the switch. I still did not use this feature yet, but will be expected to use the landlord looked automation controller for two closely say profit presses the interpreted that as meaning something else, like changing the state of another device, and control only the local light.

The switch itself may be physically big sideRequire replacing your wiring box with one deeper. I had to struggle to get him and the wires fit in a standard depth box construction.

Vizia RF Z-Wave 15 Amp Switch Feature

• Rated 15A 1800W resistive; rated 1800W incandescent; rated 1800VA fluorescent/inductive; rated 1/2HP, 9.8A motor load
• Return-to-neutral push pad - always returns to neutral regardless of load status
• Microcontroller with onboard non-volatile memory - power failure recovery assures retention of switch position during long-term power interruptions
• Air gap switch to disconnect power from load locally; it is concealed during normal operation and is accessible without removing the wallplate
• LED locator at bottom center is illuminated when the lights are OFF to make it easier to locate in the dark

Vizia RF Z-Wave 15 Amp Switch Overview

Control any light or ceiling fan remotely by replacing your standard wall switch with the Vizia RF Z-Wave 15-Amp Switch, a scene-capable on/off switch designed for use with incandescent, magnetic/electronic low voltage, fluorescent, or motor loads. Since this scene-capable switch is Z-Wave compatible, you'll be able to control it directly at the switch as well as remotely using a radio-frequency controller, so no new wires need to be run, and you won't have to rely on power lines to get your commands to your lamp. The Vizia RF Z-Wave Programmer/Controller is required for all Vizia installations and is sold separately. Decora-style wall plates are also sold separately.



*** Product Information and Prices Stored: Mar 21, 2010 08:35:45